← Back to blog
Sonnet 5.5 vs Opus 5.5: Effort, Cost per Task & Which to Use

Sonnet 5.5 vs Opus 5.5: Effort, Cost per Task & Which to Use

Emma Reed

By Emma Reed

MyClaw Editorial

Compare in MyClaw

Compare Claude Sonnet 5.5 and Claude Opus 5.5 on your own work

Give both models the same task and compare the results, speed, and usage.

AI Takeaway

  • What is the main difference between Sonnet 5.5 and Opus 5.5? The Sonnet 5.5 vs Opus 5.5 choice is speed and price versus judgment. Sonnet 5.5 is Anthropic's faster, cheaper everyday model, and Opus 5.5 targets long-running coding agents and research-heavy work.
  • How much do Sonnet 5.5 and Opus 5.5 cost? Per Anthropic, Sonnet 5.5 charges $2 input and $10 output per 1M tokens, and Opus 5.5 charges $4 and $20. Cache reads cost $0.20 per 1M tokens on both.
  • Is Sonnet 5.5 as good as Opus 5.5? It lands close on several Anthropic-reported benchmarks and wins Terminal-Bench 4.0. Anthropic still rates Opus 5.5 higher on hard, open-ended problems.
  • Is Sonnet 5.5 always cheaper than Opus 5.5 per task? No. Anthropic says Sonnet 5.5 saves the most at lower effort, and at higher effort the cost per task can end up similar.
  • Can you run both models in one agent setup? Yes. Use Sonnet 5.5 for routine, checkable work and route ambiguous or high-cost failures to Opus 5.5.

Sonnet 5.5 vs Opus 5.5 Spec Sheet

Claude Sonnet 5.5 vs Opus 5.5 is a match between siblings, called as claude-sonnet-5-5 and claude-opus-5-5 on the API. Both read up to 1M tokens, write up to 128K, accept text and images, and share a June 2026 knowledge cutoff. They split on price, thinking, default effort and speed.

SpecSonnet 5.5Opus 5.5
ReleasedSep 28, 2026Sep 22, 2026
Input / output per 1M tokens (Anthropic)$2 / $10$4 / $20
Cache write, 5-minute / 1-hour (Anthropic)$2.50 / $4$5 / $8
Cache read per 1M tokens (Anthropic)$0.20$0.20
Batch API (Anthropic)50% off50% off
ThinkingAdaptive; up-front thinking can be switched offAdaptive, always on
Default effortHigh via API, Medium in Claude appsMedium
Latency (Anthropic's label)FastModerate
RetirementNot before Sep 28, 2027Not before Sep 22, 2027

Launch details live in our full Sonnet 5.5 breakdown.

Introducing Claude Sonnet 5.5 \ Anthropic

Benchmarks: Close Scores, One Clear Caveat

The Opus 5.5 vs Sonnet 5.5 scoreboard is tighter than a 2x price gap suggests. Anthropic published these at launch:

Benchmark (Anthropic-reported)Sonnet 5.5Opus 5.5
GDPval-AA v2.118441846
AA-Briefcase v1.118111822
OSWorld 2.180.1%81.8%
CursorBench 4.055.5%57.8%
FrontierCode 1.152.1% (Xhigh effort)54.4% (max effort)
Chartography (no tools)61.6%64.4%
Humanity's Last Exam (with tools)64.5%67.7%
Terminal-Bench 4.070.6%66.4% (Xhigh effort)

Rows run roughly from closest to widest gap. Knowledge work and computer use are near ties; Opus's clearest leads are Humanity's Last Exam, Chartography and FrontierCode. Sonnet's one win, Terminal-Bench, is measured against Opus at Xhigh, its top setting there.

These are vendor numbers. Sonnet scored lower on FrontierCode at max effort (46.2%) than at Xhigh; Anthropic attributes that to timeouts and edits outside the task. Its AA-Briefcase and GDPval-AA scores came from an early deployment with a now-fixed bug. Anthropic also says scores understate the gap on loosely defined problems, where Opus 5.5 is stronger. Full results are in our Opus 5.5 review.

Opus 5.5 — Anthropic Finally Listened?

Default vs Default Is the Wrong Comparison

Run both models without setting effort and the test is lopsided: Opus 5.5 defaults to medium, while Sonnet 5.5 defaults to high through the API (Medium in Claude apps), so Opus thinks less.

Anthropic says Sonnet 5.5 complements Opus best at lower effort, where it costs less per task; at higher settings it can match Opus at a similar cost. Opus is efficient at its default, too: Anthropic reports it scored 54.6% on FrontierCode at medium effort, slightly above its 54.4% at max effort.

At Anthropic's list rates, 200K input tokens plus 10K output tokens cost $0.50 on Sonnet 5.5 and $1.00 on Opus 5.5, before caching. Task cost depends on thinking tokens and retries, so test properly:

  • Match effort, or sweep two or three levels.
  • Run identical real tasks with a pass/fail check.
  • Count retries and fixes, then compare cost per accepted result.

Pricing Opus against OpenAI instead? See how Opus stacks up against GPT-6 Sol.

API Differences That Change How You Build

Calling the API directly? Watch these differences:

  • Switching thinking off: Sonnet 5.5 accepts between_tools, which skips up-front thinking at high effort or below. Opus 5.5 always thinks, and sending disabled gets a 400 error.
  • Sampling: Per its docs, Sonnet 5.5 returns a 400 error if temperature, top_k or top_p is moved off its default.
  • Shared rules: Neither accepts forced tool use (any or tool). Both allow per-message effort changes (beta) and cache prompts from 512 tokens.
  • Thinking portability is asymmetric: Opus 5.5 can read thinking blocks from Sonnet models, but Sonnet 5.5 does not carry Opus 5.5 blocks forward. If a router moves a live conversation from Opus to Sonnet, the Sonnet turn runs without the Opus reasoning. Switch at a task boundary or start a fresh thread.
  • Safeguard fallbacks differ: Higher-risk cyber requests can fall back from Sonnet 5.5 to Sonnet 5. When Opus 5.5 safeguards intervene, cyber work can move to Opus 4.8, while biology or frontier-model work can move to Opus 5.

Coming from the previous Sonnet? Our guide to upgrading from Sonnet 5 has the migration checklist.

Compare in MyClaw
Compare Claude Sonnet 5.5 and Claude Opus 5.5 on your own work

Give both models the same task and compare the results, speed, and usage.

Use Both: Routing and Pairing Patterns

The Opus 5.5 vs Sonnet 5.5 decision doesn't have to be either/or. Anthropic documents two ways to pair a cheaper model with a frontier one so most tokens bill at the lower rate:

  • Executor plus advisor: Sonnet 5.5 does the work and consults Opus 5.5 on hard decisions through the advisor tool (beta). Anthropic runs the advisor call server-side, then returns control to the executor.
  • Orchestrator plus workers: Opus 5.5 splits the job and passes bulk subtasks to Sonnet 5.5 workers.

For simple routing, start here:

JobStart WithWhy
Bug fix with testsSonnet 5.5, low or mediumClear pass/fail, low cost
Documents, slides, spreadsheetsSonnet 5.5A strength Anthropic highlights
High-volume triageSonnet 5.5, lowSpeed and price matter most
Multi-repo migration or big refactorOpus 5.5Long, sprawling work
Sourced research reportOpus 5.5Weighing evidence takes judgment
Architecture calls, murky bugsOpus 5.5A wrong call costs more than tokens

Unsure? Anthropic's docs suggest starting on Opus 5.5 and moving work down once it proves routine.

For an agent deployment, model choice is only one layer; this guide to choosing a model for OpenClaw also covers tool use, uptime and operating cost.

Sonnet 5.5 vs Opus 5.5 Verdict: Pros, Cons and Who Should Pick Each

In the Claude Sonnet 5.5 vs Opus 5.5 matchup, each model owns a different kind of work.

Sonnet 5.5

Pros:

  • Half Opus 5.5's token price, per Anthropic
  • Fast latency tier
  • Up-front thinking can be skipped for quick turns
  • Near Opus on GDPval-AA, OSWorld and CursorBench

Cons:

  • Behind Opus on hard, open-ended problems, per Anthropic
  • Cost edge shrinks at high effort
  • Thinking-block portability is limited outside compatible Opus routes
  • Strict sampling rules
Chat with Claude Sonnet 5.5

Opus 5.5

Pros:

  • The stronger of the two on long, judgment-heavy work
  • Strong at its default (54.6% on FrontierCode at medium effort, per Anthropic)
  • Reads thinking blocks from supported prior Opus, Sonnet and Haiku turns
  • Best results on Anthropic's alignment audit

Cons:

  • Double the token and cache-write price, per Anthropic
  • Moderate latency
  • Thinking can't be switched off
  • Overkill for routine, well-defined jobs

Make Sonnet 5.5 your default for scoped, high-volume work, and bring in Opus 5.5 when a miss is expensive or the task is hard to define.

Chat with Claude Opus 5.5

Run a Sonnet 5.5 and Opus 5.5 Agent Pair on MyClaw

MyClaw offers managed OpenClaw and Hermes Agent workspaces that stay online 24/7 without server upkeep. Give each model its own agent so an Opus-to-Sonnet switch does not silently drop Opus 5.5 thinking blocks.

  1. Launch two agents. Start two OpenClaw or Hermes Agent workspaces in MyClaw.
  2. Assign one model to each. Use Sonnet 5.5 for the routine-work agent and Opus 5.5 for the hard-work agent, then connect your chat app.
  3. Test before routing. Run one representative job through both, score the results with the same rubric, and send future tasks to the cheapest model that reliably passes.

Before you start, read about hosting Hermes Agent without a server.

Compare in MyClaw

Compare Claude Sonnet 5.5 and Claude Opus 5.5 on your own work

Give both models the same task and compare the results, speed, and usage.

Sonnet 5.5 vs Opus 5.5: Effort, Cost per Task & Which to Use | MyClaw.ai